|An economical range
accommodation units for hire
industry and construction site use
STANDARD Range of
Temporary Accommodation Units
have been developed to provide an
economical range of accommodation
units designed to a high standard.
The units are designed in a range of
standard sizes, but can be readily
adapted to meet the precise
requirements of the user.
A range of alternative exterior and
interior finishes are available.
Enquiries are invited for your
All units manufactured in
accordance with the following;
BS CP3 Part 1
BS CP3 Part 2 Wind Loads
BS CP3 Part 2 Structural Use of Timber
Floor Loading 3 Kn/m2
Roof Loading 0.75Kn/m2
Floor: Constructed from 145mm x 50mm timber perimeter
beam supporting 125mm x 50mm joists at 400mm centres. The
floor is 18mm flooring grade, moisture resistant particle
board covered in 2mm solid vinyl sheet with welded
joints. The floor structure is supported on two
100mm x 50mm timber transport skids.
Walls: The walls are timber stud construction formed
by 63mm x 34mm timbers externally clad in 9mm WBP plywood
or moisture resistant particle board, finished in a resin
The internal cladding is 12.5mm emulsioned plasterboard
giving a notional half hour fire resistance. The wall
structure is insulated with 60mm fibreglass. External
corners are protected by a painted steel corner angle.
Plastic coated steel and Stenni aggregate external
treatments can be provided at extra cost. A number of
optional internal finishes can be supplied. These
include; decorative woodgrain plywoods, vinyl coated
plywoods and plasterboard, and a variety of hard wearing
melamine faced boards.
Roof: The bowstring roof is constructed from 125mm x
25mm edge beam supporting 150mm x 50mm reducing to 100mm
x 50mm joists at 400mm centres. The roof deck is 9mm CDX
plywood or moisture resistant particle board, with a
single membrane, single piece roof blanket providing an
FAA fire rating. The ceiling is lined with 12.5mm
emulsioned plasterboard, and the roof space is insulated
with 80mm fibreglass.
Windows: Faced fixed, single glazed aluminium windows
are fitted providing natural ventilation by means of top
opening vents. Double glazing is an option, at extra
cost, as are UPVC and timber framed units.
Doors: External doors are 762mm solid core flush
doors with a painted finish to the client's choice. Doors
are hung on three steel butt hinges and fitted with
2-lever mortice locks and SAA furniture.
High security steel, UPVC and aluminium doors are amongst
the options available.
Electrical Installation: All electrical installations
are in accordance with IEE regulations 16th Edition.