A1 Accommodation
The leading independent supplier
of new and fully reconditioned
accommodation units and systems 		tel: 0845 33 11 424
fax: 0845 33 11 434

A1 Supalink Modular Building System

 

A quality modular building system for temporary and semi permanent applications

The A1 SUPALINK modular building system has developed to provide a high standard in specification and interior finish making them suitable for all levels of industrial and commercial application.
The building modules are constructed to a 3m width module and are available in standard  lengths of 7.2m, 8.4m and 9.2m. The modules can be linked in side to side, end to end or side to end configurations. The standard construction can be installed in single and two storey buildings.

Statutory Requirements
All units manufactured in accordance with the following;

BS CP3 Part 1 Dead Loads
BS CP3 Part 2 Wind Loads
BS CP3 Part 2 Structural Use of Timber
Floor Loading 3Kn/m2
Roof Loading 0.75Kn/m2
General Construction

Floor: Constructed from 160mm x 50mm steel perimeter beam supporting 170mm x 50mm joists at 400mm centres. The floor is 18mm flooring grade, moisture resistant particle board covered in 2mm solid vinyl sheet with welded joints.
The floor structure is insulated with TL2 insulation system complete with 25mm air gap to provide 0.45 W/m2/Deg C heat loss.

Walls: The walls are timber stud construction formed by 80mm x 34mm timbers set at 400mm centres and clad externally with 9mm external WBP plywood or moisture resistant particle board, finished, as standard, in a resin based texture. The internal cladding is 12.5mm emulsioned plasterboard giving a notional half hour fire resistance. The wall structure is insulated with 80mm fibreglass to provide 0.45 W/m2/Deg C heat loss.
Plastic coated steel and Stenni aggregate external treatments can be provided at extra cost. A number of optional internal finishes can be supplied. These include; decorative woodgrain plywoods, vinyl coated plywoods and plasterboard, and a variety of hard wearing melamine faced boards.

Roof: The roof construction provides a ventilated roof space with traditional rainwater disposal. The structure is formed by a steel lattice roof  beams supported on 100mm x 50mm full height box sections. The roof deck is 9mm CDX plywood  or moisture resistant particle board, supported by 100mm x 34mm roof beams, and protected with a single membrane, single piece roof blanket providing an FAA fire rating.
The ceiling is lined with 12.5mm emulsioned plasterboard supported on 100mm x 34mm ceiling joists and the roof space is insulated with 100mm fibreglass providing 0.25W/m2/Deg C heat loss.

Windows: Faced fixed, single glazed aluminium windows are fitted providing natural ventilation by means of top opening vents. Double glazing is an option at extra cost.

Doors: External doors are 762mm solid core flush doors with a painted finish to the client's choice. Doors are hung on three steel butt hinges and fitted with 2-lever mortice locks and SAA furniture.

Electrical Installation: All electrical installations are in accordance with IEE regulations 16th Edition.


Our independence is your guarantee
A1 Accommodation, Great North Road, Buckden, Cambs PE19 5UL